Diamond Discs Direct - Drill Guide

Drillguide

The Drillguide is a drilling guide device with which exact through holes can be determined in stone, masonry and concrete. Gone are the times when through holes had to be calculated or estimated.

The Drillguide is simple to operate. Simply mark the positions to be drilled, attach the transmitter, using the special paste, and search for the target on the other side. The Drillguide aids you with direction arrows and accoustic signals.

Exact marking of the drilling position

For making holes in ceilings and critical core drilling holes

Drilling position for offset ceiling levels

Marking drill holes for window and door drill holes

Contents:

1 Transmitter
1 Receiver
1 Adhesion Paste
2 9V Block Batteries

Delivered in a safe and secure high quality plastic case - always ready for use.

Technical Data

Transmitter
Transmission frequencies 4.096kHz and 433.95 MHz
Transmitting power 10mW
Range at least 1.3m
Measuring tolerence 2mm per 20cm wall thickness
Degree of protection IP53
Power supply 9V blockbattery
Search depth for dynamic metal detector:
Up to approx 15cm for steel supports and large surface metals, Up to approx 8cm for steel pipes round steel and steel plating. Up to apprx 5cm for scanning individual palting rods.
Working temperature -10 to + 50 degrees C
Dimensions 80x120x30mm
Weight approx 140g

Receiver
Dimensions 80x200x30mm
Weight approx 190g