|
|
|
| |
Abrasive
Material Cutting Blades |
 |
| |
Abrasive materials diamond blades
are recommended for the cutting of most softer more
abrasive products, such as:
- softer
more abrasive brick
- abrasive block paviors
- concrete blocks
7-25Kn
- concrete
roof tiles
- soft
natural stone
- other
abrasive products
|
|
|
| |
|
|
 |
| For DIY/small jobs or occasional use,
Premium diamond blades may be preferable in price terms,
however for larger jobs Professional diamond blades
will actually prove less expensive in the long term
by delivering a lower cost per cut and less 'down time'
in blade changes. |
|
|
| Blade
Grades |
|
|
|
|
Premium Abrasives Blades
|
Professional Abrasives Blades
|
|
|
User Information
|
|
Please note: these products can be used wet or
dry on portable hand tools and cutoff saws.
For floor sawing blades of 350mm and 450mm please
refer to our concrete
& asphalt cutting
sections. Diamond blades of greater than 450mm can be found in the
Professional section
of this site.
|
| Additional
Cutting Guidance |
|
The nature of most common abrasive products necessitates
the use of a diamond blade with slightly softer bond than that of
an asphalt blade in order to facilitate cutting. However the bond
must still be hard enough to provide a good lifetime and cost per
cut.
All our abrasive blades are accurately bond matched
to provide these requirements.
|
|
|
|
